Mobile Scaffold Units

Our high quality scaffolding components are sourced from factories based in China. 

All of our scaffold needs meet both BS & AS/NZ standards required for scaffold equipment. 

Mobile scaffold towers are also stocked with components available in various heights, from 2.05m high, 2.85m high, 3.8m high, & 4.6m high. The full made up system comes in 2 widths, 915mm & 1.2m wide. These systems also have an optional but recommended safety feet/stabilizer sets. 

All our scaffolding is hot dipped galvanised as part of our specification requirements. 

All pricing is available on request. 

1.9m Mobile Scaffold Base Set.

  • Fully Galvanised.

  • 1 set of frames and cross braces

  • 1 hand rail set

  • 2 planks

  • 4 adjustable castor wheels

  • 4 joint pins

  • Frames are 1700mm in height with the wheels adding 200mm + an additional 100mm possible with adjustment.

  • Width of frames either 914mm or 1219mm

2.8m Mobile Scaffold Set

  • Fully Galvanised

  • 1 set of frames and cross braces

  • 1 hand rail set

  • 2 planks

  • 4 adjustable castor wheels

  • 4 joint pins

  • Base frames are 1700mm in height with the wheels adding 200mm + an additional 100mm possible with adjustment. Half sized frame is 900mm in height.

  • Width of frames are 914mm.

3.6m Mobile Scaffold Tower

  • Fully galvanised

  • 1 full set of frames and cross braces

  • 1 half set of frames and cross braces

  • 2 planks

  • 4 adjustable castor wheels

  • 4 joint pins

  • Frames are 1700mm in height with the wheels adding 200mm + an additional 100mm possible with adjustment.

  • Width of frames either 914mm or 1219mm

4.6m Mobile Scaffold Tower

  • Fully galvanised

  • 2 full sets of frames and cross braces

  • 1 hand rail set

  • 2 planks

  • 4 adjustable castor wheels

  • 4 joint pins

  • Frames are 1700mm in height with the wheels adding 200mm + an additional 100mm possible with adjustment.

  • Width of frames either 914mm or 1219mm

  • Additional half frames sold with set

Temporary Fencing (Minimum indent amount may apply)

  • 1 x 2400mm x 2100mm panel

  • 1 x Concrete filled plastic foot

  • 1 x Clamp

  • Size: 2400mm(L) x 2100mm (H)

  • Frame: 32mm OD < 2mm

  • Wall thickness infill mesh 4mm

  • Horizontal 4mm Vertical 150mm x 60mm spacing

  • Frame hot dip galvanised to 42 microns

Additional Stability feet

  • 1 x Triangle Frame

  • 1 x Screw Jack

  • 2 x Clips

  • Additional Stability feet sold with set

Additional Planks

  • Fits on our Mobile Scaffold units

  • 420mm width

  • Lockable hooks

  • Additional plank sold with set

Pictured: 2.85m Mobile Scaffold Unit